Skip to contents

Model and source

  • Citation: Roubaud-Baudron C, Fauchon H, Stanke-Labesque F, Paccalin M, Breilh D, Gregoire N, Forestier E, Ferry T, Gavazzi G, Goutelle S; the Infectiology and Geriatrics InterGroup (SPILF-SFGG GInGer). Pharmacokinetics of Subcutaneous and Intravenous Ceftriaxone in an Older Population: The PhASAge Study. Open Forum Infect Dis. 2025;12(6):ofaf313. doi:10.1093/ofid/ofaf313.
  • Description: Two-compartment population PK model for ceftriaxone given intravenously or subcutaneously (1 g every 24 h) to patients aged 65 years or older (PhASAge study, France). Subcutaneous doses enter a depot with first-order absorption and a bioavailability of 99%; intravenous doses enter the central compartment. Clearance is additive-linear in Cockcroft-Gault creatinine clearance (an intercept plus a slope on CRCL / 59.66) with an additive (normal, L/h) between-subject random effect; the absorption rate and central volume carry log-normal random effects. Proportional residual error. Parametric model fitted in Monolix 2023-R1 (SAEM).
  • Article: https://doi.org/10.1093/ofid/ofaf313 (open access)

The PhASAge study compared ceftriaxone 1 g every 24 h given by intravenous or subcutaneous infusion to hospitalised patients aged 65 years or older. Intravenous and subcutaneous concentrations were analysed together in Monolix 2023-R1. The final parametric model has two compartments, first-order absorption from a subcutaneous depot, and a proportional residual error. The absorption rate and the central volume are log-normally distributed between subjects. Clearance is normally distributed and depends linearly on Cockcroft-Gault creatinine clearance (Table 2, footnote c):

CLi = 0.35 + 0.3 x (CLcri / 59.66) + etaiCL (L/h)

The paper also reports a nonparametric Pmetrics model of the same structure (Supplementary Tables S1 and S2). It is not encoded here.

Population

Forty-seven patients with PK samples were analysed: 23 intravenous and 24 subcutaneous (Table 1). Mean age was 85.5 (SD 7.6) years and 51% were women. Mean weight was 67.4 (SD 14.3) kg, mean Cockcroft-Gault creatinine clearance 57.5 (SD 26.5) mL/min and mean serum albumin 31.1 (SD 4.8) g/L. Most patients were functionally dependent (77% with a Katz ADL score below 6) and nearly all took four or more other drugs. The main infections were urinary (56%) and pulmonary (23%). Patients had received ceftriaxone for more than 48 h before sampling, so concentrations were taken as steady state. Subcutaneous doses were infused over a median of 30 min, mostly into the abdomen or thigh. The study ran in 5 French hospitals from August 2019 to February 2022.

The same information is available programmatically via readModelDb("RoubaudBaudron_2025_ceftriaxone")()$population.

Source trace

Equation / parameter Value Source location
Two-compartment model, first-order SC absorption – Results, “Population PK Model”; Supplementary Methods
ka 1.63 1/h Table 2
vc 7.13 L Table 2
vp 8.29 L Table 2
q 9.14 L/h Table 2
lcl_int (CL at CRCL = 0) 0.35 L/h Table 2 “CL”; footnote c equation
e_crcl_cl 0.3 L/h per unit CRCL / 59.66 Table 2 “beta Cockcroft”; footnote c equation
CRCL divisor 59.66 mL/min Table 2 footnote c equation
lfdepot (SC bioavailability) 0.99 Results, “Ceftriaxone Concentrations” and Abstract (not tabulated)
etalka SD 0.56 (variance 0.3136), CV 60.86% Table 2 random effects
etalvc SD 0.46 (variance 0.2116), CV 48.7% Table 2 random effects
etacl (additive, L/h) SD 0.14 (variance 0.0196), CV 40.79% Table 2 random effects; Results “clearance was normally distributed”
No IIV on Vp, Q – Results, “Population PK Model”
propSd 0.11 Table 2 “Residual error, b”

Virtual cohort and dosing

The paper’s own dosing simulations sampled creatinine clearance from a log-normal distribution with median 51.95 mL/min and log-scale SD 0.51 (Supplementary Table S3 footnote). The same distribution is used here; its mean (about 59 mL/min) is close to the Table 1 cohort mean of 57.5 mL/min.

mod <- readModelDb("RoubaudBaudron_2025_ceftriaxone")
n_per_route <- 200
dose_mg <- 1000
tau <- 24
n_doses <- 14
t_last <- (n_doses - 1) * tau # start of the final dosing interval

rxode2::rxSetSeed(20250625)
cohort <- tibble::tibble(
  id = seq_len(2 * n_per_route),
  route = rep(c("Intravenous", "Subcutaneous"), each = n_per_route),
  CRCL = exp(rnorm(2 * n_per_route, log(51.95), 0.51))
)

make_events <- function(cohort, dose_mg, tau, n_doses, obs_times) {
  dose_rows <- cohort |>
    tidyr::expand_grid(dose_n = seq_len(n_doses) - 1) |>
    dplyr::mutate(
      time = dose_n * tau,
      evid = 1L,
      amt = dose_mg,
      dur = 0.5,
      cmt = ifelse(route == "Intravenous", "central", "depot")
    ) |>
    dplyr::select(-dose_n)
  obs_rows <- cohort |>
    tidyr::expand_grid(time = obs_times) |>
    dplyr::mutate(evid = 0L, amt = 0, dur = 0, cmt = "central")
  dplyr::bind_rows(dose_rows, obs_rows) |>
    dplyr::arrange(id, time, dplyr::desc(evid))
}

# Steady-state dosing interval on a 0.25-h grid, plus the study sampling times
# relative to the last dose (Cend at 0.5 h, C2h at 2 h, C5h at 5 h, C0 at 24 h).
obs_grid <- t_last + sort(unique(c(seq(0, tau, by = 0.25), 0.5, 2, 5)))
events <- make_events(cohort, dose_mg, tau, n_doses, obs_grid)
sim <- rxode2::rxSolve(mod, events, keep = "route", returnType = "data.frame") |>
  dplyr::mutate(tad = time - t_last)
#> ℹ parameter labels from comments will be replaced by 'label()'

Replicate Figure 1: steady-state concentrations by route

Figure 1 (left) shows the observed mean (SD) concentrations at each sampling time; the means are also reported in the Results text. The simulated values below include residual error (column sim).

Because clearance is normally distributed with an SD of 0.14 L/h, a few simulated subjects with low creatinine clearance draw a clearance close to zero. Their troughs run to several hundred mg/L, and they pull the simulated means well above the centre of the distribution. The 23-24 patients per arm in the study contain no such extremes. The simulated median is therefore compared against the observed mean; the simulated mean is shown alongside.

sampling <- tibble::tribble(
  ~route,         ~sample, ~tad, ~obs_mean, ~obs_sd,
  "Intravenous",  "Cend",  0.5,  143.6,     37.8,
  "Intravenous",  "C5h",   5,    85.7,      22.9,
  "Intravenous",  "C0",    24,   39.8,      16.2,
  "Subcutaneous", "Cend",  0.5,  64.7,      24.3,
  "Subcutaneous", "C2h",   2,    91.1,      34.3,
  "Subcutaneous", "C5h",   5,    86.7,      25.0,
  "Subcutaneous", "C0",    24,   44.1,      20.7
)

sim_samples <- sim |>
  dplyr::inner_join(sampling |> dplyr::select(route, sample, tad), by = c("route", "tad")) |>
  dplyr::group_by(route, sample, tad) |>
  dplyr::summarise(
    sim_median = median(sim), sim_mean = mean(sim), sim_sd = sd(sim),
    .groups = "drop"
  )

fig1_cmp <- sampling |>
  dplyr::left_join(sim_samples, by = c("route", "sample", "tad")) |>
  dplyr::mutate(pct_diff = 100 * (sim_median - obs_mean) / obs_mean)

fig1_cmp |>
  dplyr::mutate(dplyr::across(c(sim_median, sim_mean, sim_sd, pct_diff), \(x) round(x, 1))) |>
  dplyr::select(route, sample, tad, obs_mean, obs_sd, sim_median, sim_mean, sim_sd, pct_diff) |>
  dplyr::rename(
    Route = route, Sample = sample, `Time after dose (h)` = tad,
    `Observed mean (mg/L)` = obs_mean, `Observed SD` = obs_sd,
    `Simulated median (mg/L)` = sim_median,
    `Simulated mean (mg/L)` = sim_mean, `Simulated SD` = sim_sd,
    `% diff (median vs observed mean)` = pct_diff
  ) |>
  knitr::kable(caption = "Steady-state concentrations by route: Results text vs simulation.")
Steady-state concentrations by route: Results text vs simulation.
Route Sample Time after dose (h) Observed mean (mg/L) Observed SD Simulated median (mg/L) Simulated mean (mg/L) Simulated SD % diff (median vs observed mean)
Intravenous Cend 0.5 143.6 37.8 150.6 154.2 43.2 4.9
Intravenous C5h 5.0 85.7 22.9 83.2 90.0 31.7 -2.9
Intravenous C0 24.0 39.8 16.2 37.7 44.0 26.5 -5.4
Subcutaneous Cend 0.5 64.7 24.3 75.4 80.8 32.1 16.5
Subcutaneous C2h 2.0 91.1 34.3 93.6 99.2 30.9 2.8
Subcutaneous C5h 5.0 86.7 25.0 81.9 87.9 27.4 -5.5
Subcutaneous C0 24.0 44.1 20.7 38.9 43.4 24.5 -11.9
sim_band <- sim |>
  dplyr::group_by(route, tad) |>
  dplyr::summarise(
    median = median(sim), lo = quantile(sim, 0.1), hi = quantile(sim, 0.9),
    .groups = "drop"
  )
ggplot(sim_band, aes(tad, median, colour = route, fill = route)) +
  geom_ribbon(aes(ymin = lo, ymax = hi), alpha = 0.15, colour = NA) +
  geom_line() +
  geom_pointrange(
    data = sampling,
    aes(tad, obs_mean, ymin = obs_mean - obs_sd, ymax = obs_mean + obs_sd),
    position = position_dodge(width = 0.6)
  ) +
  scale_colour_manual(values = c(Intravenous = "purple", Subcutaneous = "darkgreen")) +
  scale_fill_manual(values = c(Intravenous = "purple", Subcutaneous = "darkgreen")) +
  labs(
    x = "Time since last administration (h)", y = "Ceftriaxone (mg/L)",
    colour = "Route", fill = "Route",
    caption = "Replicates Figure 1 (left) of Roubaud-Baudron 2025. Points: observed mean +/- SD; lines and bands: simulated median and 10th-90th percentiles."
  )

stopifnot(
  # The route difference at the end of infusion is the absorption signature:
  # the intravenous Cend is about twice the subcutaneous one.
  with(fig1_cmp, sim_median[route == "Intravenous" & sample == "Cend"] >
    1.5 * sim_median[route == "Subcutaneous" & sample == "Cend"]),
  # Centre of the cohort: a mis-transcribed CL, V or dose moves every sample.
  abs(median(fig1_cmp$pct_diff)) < 15,
  all(abs(fig1_cmp$pct_diff) < 30)
)

PKNCA validation

The last dosing interval of a 14-day course is effectively steady state. PKNCA computes the AUC over it, which the paper reports as a mean of 1621 (SD 409) mg.h/L for the intravenous group and 1608 (SD 538) mg.h/L for the subcutaneous group (Results; the paper’s AUCs were computed from the final model). ncaComparisonTable() summarises the per-subject PKNCA results by their median, which is robust to the near-zero-clearance draws described above; the reference values are the paper’s means. The trough (cmin) reference is the observed C0 mean.

# PKNCA reserves the column name `route`, so the grouping column is
# `treatment`.
conc <- sim |>
  dplyr::filter(!is.na(Cc)) |>
  dplyr::select(id, treatment = route, tad, Cc) |>
  dplyr::distinct()
dose_df <- cohort |>
  dplyr::mutate(tad = 0, amt = dose_mg) |>
  dplyr::select(id, treatment = route, tad, amt)

conc_obj <- PKNCA::PKNCAconc(conc, Cc ~ tad | treatment + id)
dose_obj <- PKNCA::PKNCAdose(dose_df, amt ~ tad | treatment + id)
intervals <- data.frame(
  start = 0, end = tau,
  auclast = TRUE, cmax = TRUE, tmax = TRUE, cmin = TRUE
)
nca <- PKNCA::pk.nca(PKNCA::PKNCAdata(conc_obj, dose_obj, intervals = intervals))
nca_ind <- as.data.frame(nca$result) |>
  dplyr::select(id, route = treatment, PPTESTCD, PPORRES) |>
  tidyr::pivot_wider(names_from = PPTESTCD, values_from = PPORRES)

# At steady state the AUC over one interval equals F x dose / CL for every
# subject; both sides use the same drawn parameters, so the residual is
# trapezoid error on the 0.25-h grid plus the small approach to steady state.
auc_chk <- nca_ind |>
  dplyr::left_join(sim |> dplyr::distinct(id, cl), by = "id") |>
  dplyr::mutate(
    f = ifelse(route == "Subcutaneous", 0.99, 1),
    ratio = auclast / (f * dose_mg / cl)
  )
stopifnot(abs(median(auc_chk$ratio) - 1) < 0.01)

reference <- tibble::tibble(
  route = c("Intravenous", "Subcutaneous"),
  auclast = c(1621, 1608),
  cmin = c(39.8, 44.1)
)
cmp <- nlmixr2lib::ncaComparisonTable(
  simulated = nca_ind |> dplyr::select(route, auclast, cmin),
  reference = reference,
  by = "route",
  params = c("auclast", "cmin"),
  units = c(auclast = "mg*h/L", cmin = "mg/L"),
  tolerance_pct = 20
)
knitr::kable(cmp, caption = "Simulated cohort medians vs the paper's means (AUC over the steady-state interval and trough).")
Simulated cohort medians vs the paper’s means (AUC over the steady-state interval and trough).
NCA parameter route Reference Simulated % diff
Cmin (mg/L) Intravenous 39.8 39.7 -0.2%
Cmin (mg/L) Subcutaneous 44.1 38.7 -12.2%
AUClast (mg*h/L) Intravenous 1620 1610 -0.4%
AUClast (mg*h/L) Subcutaneous 1610 1530 -5.0%
pct <- as.numeric(gsub("[^0-9.-]", "", cmp[["% diff"]]))
stopifnot(!anyNA(pct), all(abs(pct) < 20))

The simulated troughs use the individual prediction without residual error, while the paper’s C0 means are observed concentrations; the trough rows compare like with like only on average.

Replicate Figure 2: probability of a non-toxic trough

Figure 2 gives the probability that the steady-state trough is below 100 mg/L (the paper’s neurotoxicity threshold) at fixed creatinine clearances, for four regimens and both routes. Following Supplementary Table S3, the trough is taken at the end of a 7-day course. The paper used 1000 virtual patients per scenario; 200 are used here, so each probability carries a Monte-Carlo SE of up to about 3.5 percentage points. The individual prediction Cc is used, without residual error.

crcl_levels <- c(5, 15, 30, 45, 60, 90)
regimens <- tibble::tribble(
  ~regimen,   ~dose, ~ii,
  "1 g/24 h", 1000,  24,
  "2 g/24 h", 2000,  24,
  "1 g/12 h", 1000,  12,
  "2 g/12 h", 2000,  12
)
n_fig2 <- 200
t_end <- 168

grid <- tidyr::expand_grid(
  regimen = regimens$regimen,
  route = c("Intravenous", "Subcutaneous"),
  CRCL = crcl_levels,
  rep = seq_len(n_fig2)
) |>
  dplyr::left_join(regimens, by = "regimen") |>
  dplyr::mutate(id = dplyr::row_number())

fig2_dose <- grid |>
  dplyr::mutate(n = t_end / ii) |>
  tidyr::uncount(n, .id = "k") |>
  dplyr::mutate(
    time = (k - 1) * ii, evid = 1L, amt = dose, dur = 0.5,
    cmt = ifelse(route == "Intravenous", "central", "depot")
  )
fig2_obs <- grid |>
  dplyr::mutate(time = t_end, evid = 0L, amt = 0, dur = 0, cmt = "central")
fig2_events <- dplyr::bind_rows(fig2_dose, fig2_obs) |>
  dplyr::select(id, time, evid, amt, dur, cmt, CRCL) |>
  dplyr::arrange(id, time, dplyr::desc(evid))

rxode2::rxSetSeed(20250626)
fig2_sim <- rxode2::rxSolve(mod, fig2_events, returnType = "data.frame")

fig2 <- fig2_sim |>
  dplyr::select(id, Cc) |>
  dplyr::left_join(grid |> dplyr::select(id, regimen, route, CRCL), by = "id") |>
  dplyr::group_by(regimen, route, CRCL) |>
  dplyr::summarise(p_sim = 100 * mean(Cc < 100), .groups = "drop")

# Figure 2 read by the maintainers (percent, to about +/- 2 points).
fig2_paper <- tibble::tibble(
  regimen = rep(regimens$regimen, each = 12),
  route = rep(rep(c("Intravenous", "Subcutaneous"), each = 6), 4),
  CRCL = rep(crcl_levels, 8),
  p_paper = c(
    69, 82, 91, 97, 99, 100, 66, 78, 91, 97, 99.5, 100, # 1 g/24 h
    15, 23, 44, 62, 78, 97, 13, 22.5, 40, 58, 77, 96, # 2 g/24 h
    5, 10, 19, 35, 57, 90, 2, 5, 13.5, 27.5, 47.5, 82, # 1 g/12 h
    0, 0, 0, 0, 0.5, 4, 0, 0, 0, 0, 0, 2 # 2 g/12 h
  )
)
fig2_cmp <- fig2 |>
  dplyr::left_join(fig2_paper, by = c("regimen", "route", "CRCL")) |>
  dplyr::mutate(diff = p_sim - p_paper)

fig2_cmp |>
  dplyr::mutate(regimen = factor(regimen, levels = regimens$regimen)) |>
  dplyr::arrange(regimen, route, CRCL) |>
  dplyr::rename(
    Regimen = regimen, Route = route, `CRCL (mL/min)` = CRCL,
    `Simulated (%)` = p_sim, `Figure 2 (%)` = p_paper,
    `Difference (points)` = diff
  ) |>
  knitr::kable(caption = "Probability (%) of a trough below 100 mg/L after 7 days.")
Probability (%) of a trough below 100 mg/L after 7 days.
Regimen Route CRCL (mL/min) Simulated (%) Figure 2 (%) Difference (points)
1 g/24 h Intravenous 5 69.0 69.0 0.0
1 g/24 h Intravenous 15 82.0 82.0 0.0
1 g/24 h Intravenous 30 91.0 91.0 0.0
1 g/24 h Intravenous 45 96.5 97.0 -0.5
1 g/24 h Intravenous 60 99.0 99.0 0.0
1 g/24 h Intravenous 90 100.0 100.0 0.0
1 g/24 h Subcutaneous 5 69.5 66.0 3.5
1 g/24 h Subcutaneous 15 72.5 78.0 -5.5
1 g/24 h Subcutaneous 30 94.0 91.0 3.0
1 g/24 h Subcutaneous 45 98.0 97.0 1.0
1 g/24 h Subcutaneous 60 98.5 99.5 -1.0
1 g/24 h Subcutaneous 90 99.5 100.0 -0.5
2 g/24 h Intravenous 5 18.0 15.0 3.0
2 g/24 h Intravenous 15 22.5 23.0 -0.5
2 g/24 h Intravenous 30 44.0 44.0 0.0
2 g/24 h Intravenous 45 59.5 62.0 -2.5
2 g/24 h Intravenous 60 79.5 78.0 1.5
2 g/24 h Intravenous 90 97.5 97.0 0.5
2 g/24 h Subcutaneous 5 9.5 13.0 -3.5
2 g/24 h Subcutaneous 15 19.5 22.5 -3.0
2 g/24 h Subcutaneous 30 34.5 40.0 -5.5
2 g/24 h Subcutaneous 45 57.0 58.0 -1.0
2 g/24 h Subcutaneous 60 76.5 77.0 -0.5
2 g/24 h Subcutaneous 90 94.5 96.0 -1.5
1 g/12 h Intravenous 5 2.0 5.0 -3.0
1 g/12 h Intravenous 15 8.0 10.0 -2.0
1 g/12 h Intravenous 30 20.0 19.0 1.0
1 g/12 h Intravenous 45 34.5 35.0 -0.5
1 g/12 h Intravenous 60 50.0 57.0 -7.0
1 g/12 h Intravenous 90 90.0 90.0 0.0
1 g/12 h Subcutaneous 5 2.0 2.0 0.0
1 g/12 h Subcutaneous 15 5.0 5.0 0.0
1 g/12 h Subcutaneous 30 15.0 13.5 1.5
1 g/12 h Subcutaneous 45 31.5 27.5 4.0
1 g/12 h Subcutaneous 60 50.0 47.5 2.5
1 g/12 h Subcutaneous 90 88.0 82.0 6.0
2 g/12 h Intravenous 5 0.0 0.0 0.0
2 g/12 h Intravenous 15 0.0 0.0 0.0
2 g/12 h Intravenous 30 0.0 0.0 0.0
2 g/12 h Intravenous 45 0.0 0.0 0.0
2 g/12 h Intravenous 60 0.0 0.5 -0.5
2 g/12 h Intravenous 90 4.5 4.0 0.5
2 g/12 h Subcutaneous 5 0.0 0.0 0.0
2 g/12 h Subcutaneous 15 0.0 0.0 0.0
2 g/12 h Subcutaneous 30 0.0 0.0 0.0
2 g/12 h Subcutaneous 45 0.0 0.0 0.0
2 g/12 h Subcutaneous 60 0.5 0.0 0.5
2 g/12 h Subcutaneous 90 3.0 2.0 1.0
fig2_cmp |>
  dplyr::mutate(regimen = factor(regimen, levels = regimens$regimen)) |>
  ggplot(aes(CRCL, p_sim, colour = route, shape = regimen)) +
  geom_line(aes(linetype = regimen)) +
  geom_point(size = 2.5) +
  geom_point(aes(y = p_paper), shape = 4, size = 2, colour = "black") +
  scale_colour_manual(values = c(Intravenous = "purple", Subcutaneous = "darkgreen")) +
  labs(
    x = "Renal function (mL/min)", y = "P(trough < 100 mg/L) (%)",
    colour = "Route", shape = "Regimen", linetype = "Regimen",
    caption = "Replicates Figure 2 of Roubaud-Baudron 2025. Coloured: simulated; black crosses: read from the published figure."
  )

stopifnot(
  # Structural: a wrong CRCL slope or intercept shifts every curve.
  abs(median(fig2_cmp$diff)) < 5,
  quantile(abs(fig2_cmp$diff), 0.9) < 12
)

Assumptions and deviations

  • Subcutaneous bioavailability. Table 2 does not list a bioavailability parameter. The Abstract and Results state that it “was estimated at 99% by population modeling”, so lfdepot is set to log(0.99) as an estimated (not fixed) value. Its precision is not reported.
  • Clearance equation. The Supplementary Methods describe covariate effects as “log-linear”, but Table 2 footnote c prints a linear ratio, 0.35 + 0.3 x (CLcr / 59.66). The printed equation is used. It also fits the paper’s reported median individual clearance (0.63 L/h): at the cohort’s creatinine clearance of about 55 mL/min it gives 0.63 L/h, whereas a log-ratio form would give about 0.33 L/h.
  • Additive random effect on clearance. Clearance is normally distributed in the paper, so etacl is added to the linear clearance (SD 0.14 L/h). At very low creatinine clearance a small fraction of simulated subjects can draw a clearance near or below zero (about 0.4% at 5 mL/min). The model is encoded as published, without truncation.
  • Infusion durations. The paper reports a median subcutaneous infusion time of 30 min (Table 1) but gives no intravenous infusion time. Both routes are simulated as 30-min infusions. Subcutaneous infusions go into the absorption depot.
  • Sampling times. “Cend” is taken at the end of the 30-min infusion, and C2h and C5h at 2 h and 5 h after the start of the last dose, matching their x-axis positions in Figure 1. The paper does not specify whether these times run from the start or the end of infusion.
  • Creatinine clearance distribution. The virtual cohort uses the log-normal distribution the paper used for its own simulations (median 51.95 mL/min, log-scale SD 0.51; Supplementary Table S3 footnote), not the observed individual values.
  • Figure 2. The published probabilities were read off Figure 2 by the maintainers to about +/- 2 percentage points. The paper does not state when the trough was sampled; the end of a 7-day course (Supplementary Table S3 design) is used.
  • Unbound concentrations. The paper’s PTA analysis converts total to unbound concentrations with the Sanz-Codina 2023 equation, which depends on albumin and concentration. That equation is not part of this model, so the PTA results (Table 3, Supplementary Table S3) are not replicated. The toxicity threshold in Figure 2 applies to total concentrations and is replicated.
  • Nonparametric model. The Pmetrics model (Supplementary Tables S1-S2) is a discrete support-point distribution. It is not encoded.